Maintenance And Cleaning - EINHELL AG 7,2 Manual De Instrucciones

Cutting grass
Simply push the grass cutter on its wheels over the
ground. This way you will always obtain a uniform
height of cut.
The best results are achieved when the lawn is dry.
When you notice a drop in cutting performance, re-
charge the grass cutter immediately so that the
battery does not become fully discharged.
Important!
It is prohibited to remove or bridge any of the
switching elements installed on the tool by the
manufacturer (e.g. by securing a button to the
handle) as this would prevent the tool from
switching off automatically and result in high risk
of injury.
7. Fitting the long handle (applies only
to the AG 7.2 FG)
No more bending or kneeling to cut the edges of
lawns! With the plug-in telescopic handle (5) you can
push the cordless grass cutter on wheels over the
lawn from a comfortable standing position.
Simply slide the one tube inside the other and fasten
together with the clamp coupling (6). Then use the 2
knurled screws (7) to fix the telescopic handle to the
integral handle of the cordless grass cutter.

8. Maintenance and cleaning

To achieve good results you should keep the blades
sharp at all times. In particular we recommend that
you immediately level off any jags or ridges caused
by stones or the like. The tool should be thoroughly
cleaned both before and after use. A few drops of oil
(e.g. sewing machine oil) will improve the cutting
performance of the blades, but never apply any
grease to the blades. To ensure constant exact
cutting it is also important to remove grass remnants
and dirt from between the upper and lower blade.
Important!
Never clean the tool under running water - and
particularly never with high pressure - because
of the potential danger to persons and property.
Keep your cordless grass cutter in a dry and
frost-proof place. Choose a place that children
are unable to enter.
9. Troubleshooting
The tool does not cut cleanly:
Check the blades and replace them if necessary.
In case of any other faults, please contact the ISCl
Customer Service Center.
We draw express attention to the fact that we are not
responsible within the meaning of the Product
Liability Law for any damage caused by our products
if said damage results from incorrect repair or the
use of replacement parts which are not original
Einhell parts or parts approved by us and the repair
is not carried out by the ISDCCustomer Service
Center.
GB
9