SOLAC AE2510 Instrucciones De Uso página 13

Barredora eléctrica
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
4 Once you have removed the filters from the canister, empty the canister
into the rubbish bin.
5 If it is excessively dirty, wash the dust canister and filters under running
water with a gentle detergent. Important: make sure they are completely
dry before fitting them back in the canister.
6 Insert the protective filter (9) in the dust canister, making sure the air inlet
hole on the filter coincides with the air inlet nozzle on the canister. Push
the filter into position in the canister.
7 Fit the filter (10) by pressing it into the canister as far as possible.
8 Reinsert the dust canister in the broom body (3). To do this, make sure
the air inlet hole on the canister coincides with the suction nozzle hole.
Press it in place until the canister removal button (7) is in the correct
position. (Fig. 7). You will hear a click.
4 IMPORTANT INFORMATION FOR DISPOSING OF THE
BATTERY
The battery must be removed from the appliance before it is scrapped.
The battery is to be disposed of safety.
The batteries should only be removed when they no longer work.
q
Used batteries should not be thrown away with domestic rubbish; they
should be disposed of separately. Batteries should be recycled
according to European Directive 91/147/EEC.
1 To do so, remove the battery: make sure the broom is switched off and
removed from the charger before taking it apart to remove the battery.
2 Remove the three screws on the air outlet grill at the rear of the broom
body using a screwdriver. (Fig. 8). Remove the battery unit.
Ask your distributor or local council how to dispose of the batteries.
All repairs and battery replacements should be carried out by a technical
service centre authorised by the manufacturer.
IMPORTANT INFORMATION FOR DISPOSING OF THE BATTERY
en
13

Publicidad

Tabla de contenido
loading

Tabla de contenido