CAMERA USE: RECORDINGS VIDEOS
Before you start to fly it, ensure that the microSD card is inserted correctly in the entry, you will find
it on the right side of micro hexadrone (image 1 "taking pictures").
To record a video while you're usually flying with micro hexadrone maintains pressed the "Image
Capture / Video" button for a few seconds until the blue LED flashes continuously. When you want
to stop recording, simply press the same button again. The blue LED stops flashing.
PROBLEMS AND SOLUTIONS
PROBLEM
The drone does not work
The drone does not
respond correctly to the
control
INFORMATION ABOUT THE USE OF THE BATTERIES
• Do not mix different types of batteries or new batteries.
• Do not recharge disposable batteries.
• The charging process should be conducted under the supervision of an adult.
• Use only recommended batteries and ensure that insert the battery according to the right
polarity indications "+" and "-".
• Remove the batteries when you are not using the drone.
• Remove used batteries of the control.
• Turn off the drone when you are not using it.
• We do not recommend the use of rechargeable batteries.
• Do not short circuit the battery terminals.
• Discard the batteries in the recycling point. Do not mix with organic waste nor bury or burn
them.
• Do not open a battery as it may explode and / or expel toxic liquids.
• Poor contact may cause loss of power.
• If the drone suffer electrical interference, move it to another interference-free zone and reset by
disconnecting and connecting or removing and putting the batteries again.
• Charge the drone only with its charging cable.
After-sales service: C/ Acuerdo, 36 - 28015 Madrid - España
Warranty and National Technical Service
The crossed wheel container indicates that the products and batteries
should not be discarded in household waste, since they contain subs-
tances harmful to the environment. Please use the recycling points to
deposit them.
CAUSE
1. The battery does not
charge.
2.
control
exhausted.
3. The drone and control are
not properly synchronized.
1.
control
exhausted.
2. The drone and control are
not properly synchronized.
3. A propeller is damaged.
JUGUETRÓNICA, SL - NIF: B83788414
Thank you for purchasing this product.
Shop: C/ Alberto Aguilera, 1 - 28015 Madrid - España
SOLUTION
1. Charge the battery.
2. Replace empty batteries with
batteries
are
new ones.
3. Turn off the drone and control
and synchronize it again step
by step.
batteries
are
1. Replace the batteries with new
batteries.
2. Turn off the drone and the
control and resynchronize it step
by step.
3. Replace the propeller
damaged by a new one.
.