Fitting Instructions - medi SAS comfort Instrucciones De Uso

Ocultar thumbs Ver también para SAS comfort:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
English
medi SAS
comfort
Intended Purpose
medi SAS comfort is a shoulder support
cushion. The product is exclusively to be
used for the orthotic fitting of the
shoulder and only on unbroken skin or if
any wounds have been properly covered.
Indications
• Postoperative immobilisation
following the implantation of shoulder
prostheses
• Immobilisation after the reconstruction
of rotator cuff ruptures
• AC joint separation
Contraindications
There are no known side effects. Please
consult with your doctor if you suffer
from any of the following:
• Diseases or injuries to the skin in the area
in which the product is used, particularly
if there are signs of inflammation
(overheating, swelling or reddening)
• Changes in the sensitivity and
perfusion of the lower arm and hand
• Changes in lymph drainage and
swellings in the soft tissue away from
the area of use and without a clear
explanation
• Compression syndromes (pressure
irritation to the nerves in the arms)
Bandages or orthopaedic devices can in
principle cause local compression
symptoms if they are applied too tightly.
In rare cases, this may cause constriction
of blood vessels or nerves.

Fitting instructions

The orthosis is normally fitted for the
first time in the operating theatre
It should be put on and taken off on a
®
table wherever possible. Please pay
attention to the following tips:
The snap fasteners on the front of the
cushion should be opened. The shoulder
strap already lies on the table.
1. Place the arm that has been operated
on in the open pocket (Fig. 1).
2. Now close the pocket (Fig. 2).
3. Pass the waist strap around your back
and close the snap fastener.
(Fig. 3)
4. Guide the uninjured arm through
the loop and pull the belt over the
shoulder as you would with a
rucksack. Lock the buckle clip.
(Image 4+5)
5. In order to prevent the arm from
slipping out, please attach the
additional velcro fastening. (Image 6)
If you have the feeling during the night
that the arm or shoulder is not securely
positioned, you can put a pillow under
the brace or you can tighten the strap
around the waist.
In principle, this product must be used
under medical supervision. When it
is applied for the first time, this must
be under the instructions of trained
and specialised personnel, such as an
orthopaedic technician. If the support is
individually fitted by a qualified person,
this will ensure that it is effective and
comfortable.
If it is to be used with other products,
this must be discussed with the
prescribing doctor.

Publicidad

Tabla de contenido
loading

Tabla de contenido