CM Lodestar Manual De Funcionamiento, Mantenimiento Y Piezas página 9

SUSPENSION COMPONENTS
ITEM NO. PART NUMBER
1
Item No.
2
1
2
3
3
4
4
5
5
6
6 10002098B
7
8
7
9
8
10
9
SUSPENSION COMPONENTS
10
With the lug suspension (1) attached to hoist, assemble as follows and as shown in exploded view on previous page:
1. Align customer supplied mounting plate (9) to lug suspension (1) as shown in the exploded view. *Included with item 7, radio control.
2. Align radio mounting plate (6) to mounting plate (9).
3. Insert M12 bolt (2) through flat washer (3) and insert through both mounting plates and suspension lug (1), with bolt-head and flat
washer on mounting plate (6) side. Repeat for both bolts.
4. Add lock washer (5) on opposite side of bolt. Thread M12 nylon lock nut (4) onto threaded bolt by hand until finger tight.
Repeat for both nuts.
5. Torque M12 nylon lock nut to 70 ft·lbs (95 N·m). Repeat for both.
6. Using included M8 hardware (10), assemble FLEX radio control unit (7) to radio mounting plate.
7. Assemble radio antenna (8) to FLEX radio control unit.
10001745 LUG SUSPENSION
Part Number
10001754 HEX HEAD BOLT, M12x1.75THRDx60mm
10001745
10001754
10001755 FLAT WASHER, M12
10001755
10001757 NYLOCK NUT, M12x1.75THRD
10001757
10001756
10001756 LOCK WASHER, M12
10002098B
RADIO MOUNTING PLATE
10001741
10001752
10001741 FLEX 4EX RADIO CONTROL
CUSTOMER SUPPLIED MOUNTING PLATE
10001752 ANTENNA
--*
CUSTOMER SUPPLIED MOUNTING PLATE
--* M8 HEX NUT
DESCRIPTION
Description
LUG SUSPENSION
HEX HEAD BOLT, M12x1.75THRDx60mm
FLAT WASHER, M12
NYLOCK NUT, M12x1.75THRD
LOCK WASHER, M12
RADIO MOUNTING PLATE
FLEX 4EX RADIO CONTROL
ANTENNA
M8 HEX NUT
8
(ENGLISH)
QTY
1
Qty.
2
1
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
P/N: 83874-Sub1 Rev AB November 2016