Operating Cycle - Mesis PressoSport Manual De Usuario

User Manual: PressoSport
English
®
Programs (sequences)
Program A
Program A - Mode A
In this massage, the chambers inflate one at a time: more specifically, the
first chamber inflates first (either hand or foot) and then the second cham-
ber starts inflating too. After 3-4 seconds, the previous chamber deflates
and so on and so forth until reaching the last chamber of the applicator (at
the height of either the groin or the armpit).
Program B - Mode B
Program B
The chambers are progressively filled with air starting from the distal ex-
tremity (for example, in the legs it starts from the foot) towards the proxi-
mal one (for example, in the legs until reaching the groin). The air flows
into the following chamber only after having reached the pressure level
previously set for the massage. All the chambers stay inflated until the
previously pre-adjusted pressure has been reached in the last chamber too.

Operating cycle

The assage is sequential, the air produced by the device starts to inflate the chamber located
at the end of the limb (e.g. in the legs it starts from the feet) and once the chambers are
inflated, reaches the base of said limb (e.g. in the legs all the way to the groin).
CPS Mesis arm cuff: Standard abdominal belt: CPS Mesis leg cuffs:
inflation direction inflation direction inflation direction
Standard applicators and CPS Mesis
(with 4 partially superimposed
chambers)
Applicators are pneumo-relaxation elements (leg cuffs, arm cuff and abdominal/buttocks
belt) consisting of 4 chambers that inflate sequentially according to the chosen program.
They can be of two types: standard, for the abdominal/buttocks belt, and the so-called
CPS Mesis, for both the arm cuff and the leg cuffs. The latter differs from the former in
that it is characterised by partially overlapping chambers.
CPS Mesis leg cuffs
(in blue)
CPS Mesisarm cuff
(in blue)
42