Technical Characteristics; Preparation For Use - Rothenberger SOCKET WELDER P63-S6 Manual De Instrucciones

TECHNICAL CHARACTERISTICS

Voltage: 230 V AC / 115 V AC
Power/ Current:
Nominal power = 800 W
Frequency: 50/60 Hz
Working range: 20-63 mm
Temperature range: max.. 330 C
Dimensions: 475 x 359 x 110 mm
Weights:
• SOCKET WELDER P63-S6
Thermostatic = 1.5 Kg
• SOCKET WELDER P63-S6
Electronic = 1.4 Kg
• G-clamp = 0.4 Kg.

PREPARATION FOR USE

This equipment leaves the factory completely finished
and ready to use; it needs no adjustment or
preparation for use.
OPERATING INSTRUCTIONS
Welding with this unit consists of three phases:
• SUHSDULQJ WKH WXEH
• SUHSDULQJ WKH VRFNHW ZHOGLQJ GHYLFH
• WKH ZHOGLQJ SURFHVV
$ 35(3$5,1* 7+( 78%(
NOTE

INSTRUCTION MANUAL
• Cut the tube straight
across using a
suitable tool (pipe
cutter or cropper)
The surfaces to be welded
must be cleaned immediately before welding.
Protect the surfaces from weather conditions.
% 35(3$5,1* 7+( 62&.(7 :(/',1*
'(9,&(
 0RXQW WKH VRFNHW ZHOGLQJ GHYLFH
0RXQWLQJ XVLQJ WKH *FODPS
The socket welding device is supplied with a G-clamp
that can be used to attach it firmly to a workbench.
• Introduce the top section of the G-clamp into
the slot in the bottom of the unit
GB
• Clean the surface to
be welded and the
adapters with
cellulose tissue
dampened with
isopropanol
• Mark the length of
the weld on the tube