Screen Adjustment - Tecnotest Easylight 432 M Manual Operativo

SCREEN ADJUSTMENT __________________________________ ELECTRONIC HEADLIGHT CENTERING DEVICE
5.0 -

SCREEN ADJUSTMENT

ATTENTION:
Reset in the following way if the screen inside the instrument fails
to reach position 0 % or 0 cm:
• Switch the instrument off and then on again by pressing keys ON, OFF
and LUX at the same time, until the following message appears
PROGRAMMAZIONE SCHERMO.
• After a few seconds, the following message TARATURA SCHERMO will
appear on the display.
Quickly press SELECT/ENTER. The following message VOLANTINO
•
AL MIN will appear.
• Move the handwheel upwards, to the minimum setting and confirm by
pressing LUX (confirmation will only be given if the screen is physically
moved upwards). The display will now indicate VOLANTINO AL MAX.
• Move the handwheel downwards to the maximum setting and confirm by
pressing LUX again (confirmation will only be given if the screen is
physically moved downwards).
• Once these operations have been carried out the display will indicate
that resetting has occurred by means of the following message
TARATURA SCHERMO OK and the instrument will automatically return
to the main menu.
48 OPERATING INSTRUCTIONS
SCREEN ADJUSTMENT __________________________________ ELECTRONIC HEADLIGHT CENTERING DEVICE
5.0 - SCREEN ADJUSTMENT
ATTENTION:
Reset in the following way if the screen inside the instrument fails
to reach position 0 % or 0 cm:
• Switch the instrument off and then on again by pressing keys ON, OFF
and LUX at the same time, until the following message appears
PROGRAMMAZIONE SCHERMO.
• After a few seconds, the following message TARATURA SCHERMO will
appear on the display.
Quickly press SELECT/ENTER. The following message VOLANTINO
•
AL MIN will appear.
• Move the handwheel upwards, to the minimum setting and confirm by
pressing LUX (confirmation will only be given if the screen is physically
moved upwards). The display will now indicate VOLANTINO AL MAX.
• Move the handwheel downwards to the maximum setting and confirm by
pressing LUX again (confirmation will only be given if the screen is
physically moved downwards).
• Once these operations have been carried out the display will indicate
that resetting has occurred by means of the following message
TARATURA SCHERMO OK and the instrument will automatically return
to the main menu.
48 OPERATING INSTRUCTIONS