Bulldog DC6000 Manual De Instrucciones página 12

1.6 Install the Rope
WARNING
ALWAYS complete the winch installation and hook attachment before installing the wiring.
ALWAYS pre-stretch rope and re-spool under load before use. Tightly wound rope reduces
chances of "binding", which can damage the rope.
A minimum of five (5) wraps of steel wire rope and a minimum of ten (10) wraps of synthetic
rope around the drum is necessary to support the rated load.
ALWAYS spool the winch rope onto the drum in the direction specified by the drum rotation
labels on the winch and/or in the documentation. This is required for the automatic brake to
function properly.
Roller Fairlead
Hawse Fairlead
Figure 10 - Roller Fairlead - Foot Forward
wire rope
Roller
Fairlead
1.7 Install Control Box And Wiring
Figure 12 - Control Box Attachment Method 1
Supplied
Bolts
12
CEQUENT
Installation Instructions
™
Figure 11 - Hawse Fairlead - Foot Down
synthetic rope
Hawse
Fairlead
Figure 13 - Control Box Attachment Method 2
Supplied
Hose
Clamps
F3838-00 REV C (4782) 7/15
-