Bulldog DC6000 Manual De Instrucciones página 13

1.7.1 Install the Wiring
WARNING
BEFORE installing the winch, make sure all electrical parts are corrosion free.
ALWAYS place the supplied terminal boots on wires and terminals as directed by the installation
instructions.
NEVER lean over battery while making connections.
NEVER route electrical cables over battery terminals.
ALWAYS consult Electrical Connections section for proper wiring details.
Run the charging system during winching operations to keep battery charged.
NEVER route electrical cables across sharp edges.
NEVER route electrical cables near parts that get hot.
NEVER route electrical cables through or near moving parts.
AVOID pinch and wear/abrasion points when installing all electrical cables.
ALWAYS insulate and protect all exposed wiring and electrical terminals.
1.7.2 Battery Recommendations & Lead Size
1.7.3 Battery Cable Routing
WARNING
ALWAYS route battery cables along a path that allows the cables to be secured with zip ties.
Loose or unsecured power cables can cause serious injury or death.
CEQUENT
Installation Instructions
Figure 14 - Torque Specification
™
14 N-m
124 in-lbs.
F3838-00 REV C (4782) 7/15
-
-
-
13