Publicidad
Idiomas disponibles
Idiomas disponibles
MD300M
European union
approval
Authorized
representative
in the European
community
The waste electrical
and electronic
equipment
Adpater polarity
symbol
?
Indicate the signal is
not stable
1.7 Product Features
High resolution 2.8" TFT screen display SpO
pulse bar.
Adjustable audible and visual alarms.
127 ID setup; 72-hour data storage and review.
Medview software for data analysis.
3 AA alkaline batteries or power adapter (optional).
Muti-language (Menu): English, French, Italian, German, Japanese, Spanish, Russian and
Chinese
1.8 Contraindication
None
PULSE OXIMETER
Date of Manufacture
Follow instructions for use
Class II equipment
Battery cover unlock / lock
Do not discard the device
and other components
, PR, PI (Perfusion Index), waveform and
2
- 8 -
INSTRUCTION MANUAL
2 General Description
The MD300M pulse oximeter adopts 2.8 inch TFT screen, which can display the SpO
rate, PI and other indication parameters, such as time, ID number, pulse amplitude bar and
battery power status, alarm limits and the connections of probes, etc.
2.1 Appearance
Description of these figures:
(1) USB socket: used to connect the USB cable for data transmission.
(2) SpO
socket: For connecting the SpO
2
(3) Alarm lamp: When SpO
or/and PR alarm occurs, It flashes.
2
(4) Display screen
(5) Menu/OK button: For entering main menu, or confirming the selection/setting.
(6) Alarm silence button: Press this button to silence the audible alarm.
(7) Navigation button(Up): Press this button to increase the value by one increment. Or
press it and hold it down to continuously increase the value. Or select the item you want.
(8) Back/Shift button: On the measuring screen, press it to change the display mode; On
the sub-menu screen, it serves as Back button.
(9) Power switch: Press and hold it for 3 seconds to power the device on, and for about 4
MD300M
Fig.2-1
probe with the pulse oximeter.
2
- 9 -
, pulse
2
Publicidad
