Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY STEP 5
HARDWARE BAG 5 CONTENTS :
SCREW (I)
15 mm
Qty: 2
LEFT CONSOLE MAST
DECK LOCK PIN
SCREWS (I)
10
T100-OM-rev1.2.indd 10-11
Open hardware bag 5.
A
Attach deck lock pin to the left
B
console mast using 2 screws (i).
Insert cup holder into right console pocket.
C
CUP HOLDER
CONSOLE
ASSEMBLY STEP 6
HARDWARE BAG 6 CONTENTS :
SCREW (J)
12 mm
Qty: 4
SCREWS (J)
END CAP
Open hardware bag 6.
A
NOTE: lock latch must be securely engaged
before proceeding with assembly. (See page
folding instructions in TREADMILL gUIDE.)
Attach the right end cap using 2 screws
B
(j). Repeat on the other side.
Connect power cord to a power outlet. The
C
ON/OFF switch is located next to the power
cord. Flip this switch to the 'ON' position. You
will hear a beep and the console will turn on.
D
Before the first use, lubricate the treadmill
deck by following the instructions in the
MAINTENANCE section in the TREADMILL
gUIDE.
YOU ARE FINISHED!
7/28/10 9:02 AM
11
Publicidad
Tabla de contenido
