Publicidad
Idiomas disponibles
Idiomas disponibles
Spade Lug Recommendation
The diameter of the terminal screw head is 5.5 mm (0.220 in.). The input and
output terminals of the MicroLogix 1200 controller are designed for the following
spade lugs. The terminals will accept a 6.35mm (0.25 in.) wide spade (standard for
#6 screw for up to 14 AWG) or a 4 mm (metric #4) fork terminal.
When using spade lugs, use a small, flat-blade screwdriver to pry the finger-safe
cover from the terminal blocks. Then loosen the terminal screw.
TIP
If you wire the terminal block with the finger-safe cover
removed, you may not be able to put it back on the terminal
block if the wires are in the way.
MicroLogix™ 1200 Programmable Controllers
Finger-safe cover
Publication 1762-IN006D-MU-P - March 2004
17
Publicidad
