Seat cover
29-
30-
Pushchair
31-
Removing:
Remove the harness (refer to step 14) & hood (refer to step 25) respectively.
Release the fabric fastener on the underside of the calf support (a).
Release the strap under the seat (b).
Unfasten the fastening tabs on each side of the seat cover (c).
Unfasten the clip on each side of the seat cover (a).
Unfasten the fastening tabs on each side of the backrest (b).
Remove the seat cover off the seat (c).
Refitting is a reversal of this procedure.
Closing:
Always remove the raincover and store it under the seat (refer to step 27).
Close the hood fully (refer to step 21) (a).
Slide the primary lock lever (b) and rotate the secondary lock handle forward
FULLY (c) to unlock the chassis.
Push the handle downwards (d) until the chassis is locked in place (e).
5