LAVAZZA EP2400 Manual De Uso página 14

GB
Power the machine by connecting its lead with the electrical outlet (Figure 4).
Move the switch on the back of the machine to position "I" (Figure 5).
Remember to connect, first, the feeder to the machine, then the feeeder must
be placed into the wall socket, then you turn it on. To move the machine,
you have to turn the switch to the position '0', after you have to disconnect
the wall socket and finally you have to separate the feeder from the machine.
The following LEDs will light up on the front panel (Figure 6):
Lighted red line "presence of tension"
It shows that the machine is under tension.
Flashing orange "Temperature control LED".
It shows the intervention of the thermostat. It is flashing when the boiler hasn't
reached the right temperature. It is on and fixed when the boiler has reached
the right temperature.
Flashing green "Water Supply Level LED"
It shows the level supply of water in the tank. If the tank is full the LED will be on.
On the contrary if the level of water is too low, the LED will start flashing.
Led green
Fig. 4
CAUTION
Red line
12
Fig. 5
Led orange
Fig. 6