Handle Assembly - Yakima Spare Tire Carrier Manual De Instrucciones

HANDLE ASSEMBLY:

through wheel
plate, and washer.
Set handle assembly into
the center of the wheel.
Insert the carriage bolt into the square hole
which best aligns to any hole in the wheel.
Tighten the nut completely until it stops
against the wheel plate.
1032311C-3/8
Attach the plastic cap to the
Hook the loop in
the center of the
anchor plate.
Tighten the handle until
there is slight resistance.
DO NOT OVERTIGHTEN
Load the tire into the basket so that
INSIDE of wheel faces upward.
Center tire over anchor plate.
With your own lock, pass the
shackle through the tabs.