Publicidad
Idiomas disponibles
Idiomas disponibles
menu for green LED
menu for blue LED
menu for white LED
menu for amber LED
flash or shutter function (from fast to slow, 0 to 99)
fade speed setting (from fast to slow)
colour change speed setting (from fast to slow)
pixel effect (from fast to slow)
built-in programmes
sound control
DMX mode (mode A: 9 channels, mode P: 24 channels, mode H: 60 channels)
dimmer mode
7.3
Stand-Alone Mode
In stand-alone mode, the device runs one of the built-in programs: automatic or sound-activated.
Stand-Alone Mode with Built-in Program
To set the device to stand-alone mode:
1.
Unplug any connection from the DMX input [4] of the device.
2.
Press MENU to open the menu.
3.
Select <PROG>.
Sound Activation
With sound activation, the built-in program responds to sound. To use sound activation with the selected
built-in program:
1.
Press MENU to open the menu.
2.
Select <SOND>.
7.4
Master/Slave Mode
The master/slave mode allows for connecting several devices to a single master device in a daisy chain.
All slave devices will then work synchronously with the master device. The first device in the daisy chain
functions as the master device.
To set the devices to master/slave mode:
1.
Unplug any connection from the DMX input [4] of the master device (the first device in the chain).
2.
Connect the DMX input of the first slave device to the DMX output [4] of the master device.
3.
Connect the DMX input of the subsequent slave devices to the DMX output of the previous slave
device.
4.
Select a working mode on the master device.
5.
Set the DMX start address of each slave device to 1 (see DMX Mode for details). All connected
devices will work in synchronization with the master device.
V. 01 – 24/09/2014
VDPL1212RGBWA
6
©Velleman nv
Publicidad
