Programming A Normal User Key - hafele DT 700c Manual De Instrucciones

8.1 Programming a normal user key

Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard.

LED flashes white for max. 5 seconds.
3. Remove user key.

LED flashes white for a further 5 seconds.
5. Repeat steps 2 to 4 until all necessary user keys have been granted the locking authorisation.
6. The LED switches off once the 5 seconds have elapsed.
44
Tag-it ™ISO
Programming key card
5 s
DT 710c
5 s
DT 710c
User keys
2. Hold the user key in front of the antenna during
this 5-second period.

Acoustic signal is heard. LED briefly
illuminates white.

Locking authorisation is allocated.
4. Hold another user key in front of the antenna
during this 5-second period.

Acoustic signal is heard. LED briefly
illuminates white.

Locking authorisation is allocated.
1 s
DT 710c