Programming A User Key With Deadbolt Lock Function - hafele DT 700c Manual De Instrucciones

8.3 Programming a user key with deadbolt lock function

Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard. LED flashes white
for max. 5 seconds.
3. Hold the programming key card in front of the
antenna again during the 5-second period.

Acoustic signal is heard twice. LED flashes
white even more slowly.
5. Remove user key.

LED continues to flash white slowly.
7. Repeat steps 4 to 6 until all necessary user keys have been granted the locking authorisation.
8. The LED switches off once the 5 seconds have elapsed.
46
Tag-it ™ISO
Programming key card
5 s
DT 710c
2x 1x/s
DT 710c
5 s
DT 710c
User keys
2. Hold the programming key card in front of the
antenna again during this 5-second period.

Acoustic signal is heard twice. LED flashes
white more slowly.
4. Hold the user key in front of the antenna during
the 5-second period.

Acoustic signal is heard. LED briefly
illuminates white. Locking authorisation is
allocated.
6. Hold another user key in front of the antenna
during the 5-second period.

Acoustic signal is heard. LED briefly
illuminates white.

Locking authorisation is allocated.
2x 2x/s
DT 710c
1 s
DT 710c
1 s
DT 710c