FITFIU FITNESS MC-200 Manual Usuario página 51

ASSEMBLY
STEP 1.
Take all parts out of the carton and place them on a firm, flat surface. Remove all packing materials.
STEP 2.
Position the equipment on its right side, then insert a stabiliser foot (1) into the frame (A). Secure the side parts
together using 2 M6x10 screws (2) and 1 M8x20 screw (3). Firmly tighten (rotate right) all fasteners using the Allen keys.
Repeat this process for the left-hand side.
STEP 3.
Position the equipment so it is standing on the frame and stabiliser feet – this is the folded position. Hold the belt
platform (C) firmly so that it cannot fall, then remove (rotate left) the locking bolt (B) – this allows the belt platform to be lowered.
Gently lower the belt platform so the equipment is unfolded, then secure the belt platform to the handlebar frame (D) using the
locking bolt (B) and tighten (rotate right) it firmly by hand.
STEP 4.
Rotate the handlebar / console (E) forward so the handlebars are horizontal. On the underside of the console,
secure it to the frame using 2 M8x20 screws (3). Firmly tighten (rotate right) the fasteners using the Allen key.
The machine should resemble the image below and is ready for use.
After the installation of this treadmill it is possible to see the two connecting lines of the two ends of the running
surface, which guarantees its stability. And it is carried out by means of a meticulous heat-sealing process during its
manufacture. It is the longest lasting way to join the tape itself and ensure the life of the product.
A
1
C
B
E
51
ELECTRIC TREADMILL
D
MC-200
2
3
B
3
EN