Using The Product; Console And Functions - FITFIU FITNESS MC-200 Manual Usuario

USING THE PRODUCT

SAFETY TETHER AND EMERGENCY STOP
The equipment comes with a "safety tether" (A). The
safety tether must be attached to the console for the
equipment to run. It is designed to attach to your clothing
so that if you leave or fall from the equipment it will stop
automatically, helping prevent injury.
Before beginning a workout session, ensure that the
safety tether is properly placed onto the console and
that the clip is securely attached to your clothing.
NOTE: If the equipment is on, but the safety tether is not attached, "E07" shows on the display
and the equipment cannot be started.

CONSOLE AND FUNCTIONS

The equipment features a computerized display that provides you with controls for operating the unit as well as
workout information, such as duration, speed, distance travelled etc.
To use the equipment:
1. Plug the equipment into the electrical supply.
2. Place the power switch (B), located at the front
of the unit, in the "ON" ("I") position.
3. Attach the safety tether to the safety tether
location on the console.
4. Operate the equipment as desired.
Always stand on the side rails when starting the
equipment. Never stand on the belt then start the
machine.
ELECTRIC TREADMILL
B
53
MC-200
A
EN