ALLURIS FMT-100WT Instrucciones De Servicio página 20

Peak data output
3. digit:
4.-6. digit. Value incl. floating decimal point
Unit: 3 digit
0 = N
1 = kg (g)
3= lb (oz)
Error OBcr
OEcr
OFcr
OGcr
OHcr
Analogue Output
The analogue output (-1...0...1 VDC) can be used to serve appropriate data loggers, recorders, printers or other
monitoring equipment. Compression forces are indicated in with positive voltage, tension forces with negative
voltage. The signal can be set to zero (reset) by taring the instrument. +1 VDC and – 1VDC refers to the maximal
and minimal full scale (end of nominal measuring range).
Specification
Amplitude
Signal generator
Signal update
+ /or -
-1VDC / +1VDC
12-bit D/A-Converter
100 Hz
NB
NH cr
Command Error
Parity Error
Format Error
Summing Error
Overflow
20
cr