Technical Data; Dimensional Drawings - Eneo VHM-Z Serie Instrucciones De Manejo

8. Technical Data

Model
Art. No.
Installed length overall
Space required for the
mains power supply unit
Cable entry
Cable connection
Viewing pane
Power supply voltage
Windshild defroster
heating
Thermostat
Temperature range
(only housing)
Sun shield
Housing
Colour
Protection system
Noise generated
Supply items
Dimensions
Weight
Optional Accessories
The optional accessories currently available can be found on our Homepage: www.videor.com

9. Dimensional drawings

See Page 5
VHM/ZLA-W
Weather-proof housing
with main connector and
230V heater
7968
NE- (VDC or 4VAC):
85mm; NE-/ (DC/
4VAC): 0mm
M5 x .5mm (for 9 ~ 7mm diameter cable)
Terminal board - see accessories list
This coating prevents corrosion caused by environmental effects and extends times
The coating is UV-resistant, neutral in colour and causes no loss of transmission.
50VAC/50Hz; 300mA / AC
0-65V / approx. 9W
On: +6ºC; Off: +0ºC (contained in the #79609 terminal board and power supply unit)
Attachment screw set,
Main connector casing with a 30 pin multipoint plug
VHM/ZLB-W
Weather-proof housing
with main connector and
24V heater
7968
330mm
„Clear shield" coating
between cleaning the pane.
4V (convertible to V), approx. 6W
-30ºC to +60ºC (with disk heater)
Yes
Aluminium
RAL906
IP 66
<70dBa
See the dimensional drawing
.9kg
6
VHM/ZLKCB-W
Weather-proof housing
with central plug
connector and 24V
heater, pre-configured
79683
–
–
4VAC
The central plug is inside
assigned with connection
cable. Camera and lens
connection are prepared.