Types Of Power Supply - Olymp LavaSit VAREO Instrucciones De Servicio

5. Types of power supply

a. Fixed installation (230V/50Hz AC voltage)
• The E-motors for the leg support and the vibrators are directly connected to the client's mains
supply.
• Connection to the power supply must be performed by a trained electrician!
b. Mains cable (230V/50Hz AC voltage)
• The E-motors are connected to the power socket by means of an external mains cable with mains
plug. The mains cable of the LavaSit Vareo must only be connected to a correctly installed and
earthed shock-proof socket.
• Optional: Cable channel for floor installation (Fig. 7) to avoid risk of stumbling.
Lay the power cable from the shampoo unit through the cable channel to the power socket.
• If the wash unit is wall mounted (input and output water via installation shaft from the wall), the
power supply cable can be laid to the wall in the upper area of the installation shaft and be
plugged into a wall socket there.
• When several units are installed in-line the power supply cable of one unit must not
be connected further to another unit!
Environment:
Voltage: Europe
Power input:
Device in protective class:
EU conformity:
Certification:
GB
For the correct disposal of this product, special national regulations or
ordinances may apply. Please observe these regulations carefully.
220 – 240 V / 50 Hz
36 W
1I
The washing unit complies with the regulations as under the low-voltage
regulations 98/79/EG and the regulations governing electromagnetic
compatibility 89/336/EWG.
CE conformity identification
4