Olymp LavaSit VAREO Instrucciones De Servicio página 9

d. Ergonomically designed neckrest with grips enabling easy tilting into position
By means of the grips, the customer can tilt the shampoo basin into the position most
•
comfortable for her.
e. Cleaning ceramic parts
Rub dry with a soft cloth or microfibre cloth.
•
Stubborn spots and calcified deposits should be removed using a mild cleansing agent.
•
On no account should abrasive cleansers or solvents be used!
•
2. Comfort chair
a. Chair with electrically swivelling leg-support
The leg-support (Fig. 3) is operated by means of the 2-key remote control (Fig. 8).
•
Move the leg-support upwards by means of the
•
Move the leg-support downwards by means of the
•
The remote-control unit is secured magnetically to the right-hand side of the seat. (Fig. 3)
•
b. Seat with electrically-powered extending leg rest and vibro-massage function
The seat has a total of six vibration motors: two motors in the shoulder zone, two in the lumbar zone
•
and two in the leg rest.
You can use the multi-button remote-control unit (Fig. 9) to control both the leg rest and the vibro-
•
massage functions as follows:
0 If lamp is lit green, your unit is connected to power supply and is ready for use.
1 Massage motors in shoulder zone ON/OFF
2 Massage motors in lumbar zone ON/OFF
3 Massage motors in leg rest ON/OFF
4 Lamp lights up when massage motors in shoulder zone are operating.
5 Lamp lights up when massage motors in lumbar zone are operating.
6 Lamp lights up when massage motors in leg rest are operating.
7 Button to adjust massage intensity.
8 Button to adjust massage rhythm.
9 Button to select a massage program. The "Flat" program is selected by default when buttons
- are pressed.
Program 1: "Flat" – The massage motors selected with
lowest intensity and speed level.
Program 2: Pressing button
alternately in the zones selected by
Program 3: Pressing button
motors selected with
intensity.
A Lamp lights up green when buttons
lowest level is reached.
B Lamp lights up when the "Flat" program is activated.
C Lamp lights up when the "Tap" program is activated.
D Lamp lights up when the "Wave" program is activated.
E "Stop" button switches off all massage functions.
F Raise/lower leg rest (Fig. 3). Pressing the
Pressing the
GB
starts the "Tap" program – the massage motors operate
-
a second time starts the "Wave" program – the massage
- operate in a wave-like cycle with increasing and decreasing
and
button lowers the leg rest to the required height.
2
-key.
-key.
- operate simultaneously at the
.
are pressed. It goes out when the highest or
button raises the leg rest to the required height.