Speedlink Black Hawk Instrucciones De Manejo página 7

4. Programming turbo fire
Only buttons 1-8 can be asigned with turbo fire.
1. Hold down the turbo button.
2. Press simultaneously the button to which you wish to assign turbo function.
LED will start flashing.
3. Let go off both buttons to finish programming.
4. If programming has been successful, the LED flashes as soon as you press
the button to which you have assigned turbo fire.
4.1 Reset programming
1. Hold down "Clear" button.
2. Press simultaneously the button from which you want to delete turbo
function.
3. Now the button should function as normal fire button.
5. Notes on use
To test all of the Joystick's functions, do the following:
1. Connect the joystick to the USB port of your PC.
2. In Windows, open "Start/Control panel/System".
3. Double click on "Game controllers" ("Sound, video and game controllers"
under Windows Me) to display a context menu.
4. In the context menu, your joystick should be listed.
5. Click on properties to test operation of the buttons, axes, throtle and
rudder control of the joystick.
6. Click on the "Effects" tab to test the vibration function of your joystick.
7. If all functions work to your satisfaction, click on "OK" to exit the menu.
Troubleshooting
The joystick does not work even though it is correctly connected.
1. Make sure, in the game controller menu, that your joystick is listed in the
window. To do this, follow steps 2-4 in the section 7 "Notes on use".
Under Windows XP , the entry appears under "Game controllers/ Extended",
select the device there and confirm with "OK".
2. If necessary, uninstall other installed game controllers, restart the PC,
and install the supplied software again.
7
D
GB
F
E
I