System Requirements; Connecting The Mouse; Connecting Via Usb - Speedlink SL-6130 Instrucciones De Manejo

Thank you for purchasing the Fast Pluggable Mouse. This mouse can be
easily connected to all PCs.

System requirements

• Windows 95/98/2000/ME/NT/XP
• USB or PS2 port

Connecting the mouse

Note: There is no software installation necessary, the
mouse will work with windows drivers.
Connecting via PS2 port
1. Switch off your computer.
2. Connect the USB/PS2 adapter to the USB connector of
your device.
3. Connect the USB/PS2 adapter to the corresponding
PS/2 port of your computer; this is identified by a mouse
symbol or coloured green.
4. Switch the computer on again.
Note: most computers have more than one PS2 socket for connecting the
mouse and the keyboard. However, some computers still only have one
socket, which can be used for either mouse or keyboard. Such systems
only allow connection of one of the two devices.

Connecting via USB

1. Insert the USB connector in the appropriate USB socket of your com-
puter.
2. The plug&play function of your system will automatically detect that a
new device has been connected. Windows may ask you to insert the
Windows Installation CD. Follow the instructions on the screen.
Note: Windows 95/NT do not support USB devices.
Troubleshooting
The curser won't move at all or moves in jerks.
Clean the ball of the mouse. To do this, remove the cover on the bottom of
the mouse (usually by twisting the cover). Clean the ball and try to remove
any dust or dirt inside the mouse with a cotton bud. Do not use a damp
cloth for this! Replace the ball and finally re-fit the cover.
4
D
GB
F
E
PS/2
I
USB