General Description - USAG 076 A Manual Del Usuario

Do not ground yourself.
Do not operate this meter if your hand or the meter is wet.
prevent shock and arc blast injury when working in an area where hazardous live
conductors are exposed.
During replacement of fuses, please only use the spare fuses from us.
Remaining endangerment: When an input terminal is connected to dangerous live
potential it is to be noted that this potential at all other terminals can occur!
CAT III - Measurement category III is for measurements performed in the building
installation. Examples are measurements on distribution boards, circuit breakers,
wiring, including cables, bus-bars, junction boxes, switches, socket-outlets in the
fixed installation, and equipment for industrial use and some other equipment, for
example, stationary motors with permanent connection to fixed installation. Do not
use the meter for measurements with in Measurement Categories IV.
Caution
To avoid possible damage to the meter or to the equipment under test, follow these
guidelines:
Disconnect circuit power and discharge all capacitors before testing resistance,
diode, capacitor and continuity.
circuit before connecting the meter to the circuit.
Before rotating the range switch to change functions, disconnect test leads from the
circuit under test.
Symbol
Alternating Current
Direct Current
DC orAC
Caution, risk of danger, refer to the operating manual before use.
Caution, risk of electric shock.
Earth (ground) Terminal
Fuse
The equipment is protected throughout by double insulation or reinforced
insulation.

GENERAL DESCRIPTION

This meter is a compact 3 3/4 digits digital multimeter for measuring DC and AC
voltage, DC and AC current, resistance, capacitance, frequency, diode, continuity and
duty cycle. It features polarity indication, data hold, overrange indication, automatic
power-off, and so on. It is easy to operate and is an ideal measurement tool.
15 15