Operating The Device; Cleaning And Maintenance - Domo DO315IP Manual De Instrucciones

www.domo-elektro.be

OPERATING THE DEVICE

• Plug the power plug into a suitable outlet.
• The control lamp of the ON/STANDBY switch lights up and an acoustic signal
sounds.
• Now the device is in standby mode. On the display will appear the temperature of
the cooking surface. 'L' means the temperature is lower than 50°C. 'H' means the
temperature is higher than 50°C.
• Place suitable cookware in the centre of the hotplate.
• Now press the ON/STANDBY switch once to turn the induction hotplate on. The
control lamps of 'HEAT' and 'TEMP' blinks and an acoustic signal sounds. The
indication 'L' or 'H' on the display, will disappear.
NOTE: should you do nothing within 30 seconds after pressing 'ON/STANDBY'
key, the control lamp 'HEAT' in the display goes off and then the unit goes
back to standby status automatically. To reoperate the unit, simply press 'ON/
STANDBY' key and other function keys.
• Press the function key 'HEAT'. The preset power stage '5' is selected and the
device turns on.
• With the knob, you can change the settings at any time in a range from 1 – 10.
• Press the function key 'TEMP' to select the temperature. The preset temperature
stage 120°C is selected and the device turns on.
• With the knob, you can change the settings at any time in a range from 60°C to
240°C.
• Timer function. After the selection of the temperature mode press the but key
'TIMER'. The display shows the number '0'. With the knob, you can now select
the operating time in 5-minute intervals (up to max. 180 minutes). Then the
display counts down the duration in minutes. Once the time is up, an acoustic
signal sounds and the device automatically goes into standby mode.
NOTE: during timer operation, you can change the duration at any time with
the arrow keys. With the memory function of the device, the power stage or
temperature settings remain unchanged here.
• Once the cooking or warming process is finished, disconnect the mains plug from
the outlet.
• Do not place any empty cookware on the ceramic field. Heating an empty pot or
pan activates the overheating protection and the device turns off.
• Do not operate the device if it is damaged in any way or does not function
properly.
• The use of accessories and spare parts not recommended by the manufacturer may
lead to damage on the device and injuries.

CLEANING AND MAINTENANCE

• Pull the power plug prior to cleaning the device. Do not use any caustic cleaning
agents and make sure that no water penetrates the device.
• To protect yourself from electric shock, never immerse the device, its cables and
35
DO315IP