Tabla de contenido
Publicidad
CE
DECLARACIÓN
MANUFACTURER'S CE DECLARATION of CONFORMITY according to ISO/IEC 17050
OLIVETTI S.p.A
Declara bajo su responsabilidad que:
Declares under its sole responsibility that:
el producto descrito en esta guía
the product described in this guide
RESPONDE a la Directiva 1999/5/CE del 9 de marzo de 1999
is in compliance with directive 99/5/EC dated 9
y cumple con los requisitos esenciales de Compatibilidad Electromagnética y de Seguridad previstos por las
Directivas:
fulfill the essential requirements of Electromagnetic Compatibility and of Electrical Safety as prescribed by the
Directives:
89/336/CEE del 3 de mayo de 1989 y las posteriores modificaciones (Directiva 92/31/CEE del 28 de abril de
1992 y Directiva 93/68/CEE del 22 de julio de 1993);
rd
89/336/EEC dated 3
May 1989 with subsequent amendments (Directive 92/31/EEC dated 28
nd
93/68/EEC dated 22
July 1993);
2006/95/CE del 27 de dicembre de 2006;
th
2006/95/EC dated 27
December 2006;
puesto que está diseñado y fabricado conforme a las siguientes Normas Armonizadas:
since designed and manufactured in compliance with the following European Harmonized Standards:
EN 55022/A2 : 2003 (Limits and methods of measurements of radio interference characteristics of Information Technology
Equipment) / Class B;
EN 61000-3-2/A1 : 2002 (Electromagnetic Compatibility (EMC) - Part 2 : Limits - Section 2 : Limits for harmonic current
emissions (equipment input current ≤ 16 A per phase);
EN 61000-3-3/A1 : 2002 (Electromagnetic Compatibility (EMC) - Part 3 : Limits - Section 3 : Limitation of voltage
fluctuations and flicker in low voltage supply systems for equipment with rated current up to and including 16A);
EN 55024/A1 : 2002 (Electromagnetic Compatibility - Information technology equipment - Immunity characteristics -
Limits and methods of measurement);
EN 60950-1/A1 : 2004 (Safety of Information Technology Equipment, including electrical business equipment).
El producto también responde a las siguientes normas:
Moreover the model is in compliance with following Standards:
ETSI TBR 38 : May 1998 Requirements for a terminal equipment incorporating an analogue handset function capable of
supporting the justified case service when connected to the analogue interface of the PSTN in Europe.
ETSI ES 203 021 : January 2006 Access and Terminal (AT); Harmonized basic attachment requirements for Terminals for
connection to analogue interfaces of the Telephone Networks.
ETSI EN 301 406 : 2003 Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for Digital Enhanced
Cordless Telecommunications covering essential requirements under article 3.2 of the R&TTE Directive Generic radio.
ETSI EN 301 489-6 : 2002 Electromagnetic compatibility and radio spectrum Matters (ERM); Electromagnetic
compatibility (EMC) standard for radio equipment and services; Part6: specific conditions for Digital Enhanced Cordless
Telecommunications (DECT) equipment.
ETSI EN 301 489-1 : 2005 Electromagnetic compatibility and radio spectrum Matters (ERM); Electromagnetic
compatibility (EMC) standard for radio equipment and services; Part1: Common technical requirements.
La conformidad con los mencionados requisitos esenciales se demuestra mediante la colocación de la Marca CE en
el producto.
Compliance with the above mentioned essential requirements is shown by affixing the CE marking on the product.
Scarmagno, 08 de marzo de 2007
th
Scarmagno, 8
march 2007
Notas: 1) La Marca CE se colocó en 2007.
Notes: 1) CE Marking has been affixed in 2007.
2) El Sistema de Calidad responde a las normas de la serie UNI EN ISO 9000.
2) The Quality System is in compliance with the UNI EN ISO 9000 series of Standards.
Olivetti S.p.A. Sede Sociale Ivrea,Via Jervis,77 – Cap. Soc. Euro 154.000.000 – C.C.I.A.A. Torino n. 547040 – Trib Ivrea Reg. Soc. n. 1927 – Cod. Fisc. e Part. IVA 02298700010
DE CONFORMIDAD del FABRICANTE, de acuerdo con la norma ISO/IEC 17050
Via Jervis, 77 - IVREA (TO) - ITALY
th
march 1999
th
April 1992 and Directive
Olivetti S.p.A.
Publicidad
Tabla de contenido
