Makita DBM 131 Instrucciones De Servicio página 9

ENGLISH
Technical data:
Rated voltage:
Power input:
Load speed:
Maximum bore diameter:
Safety class:
Tool holder:
Weight according to EPTA Procedure 01/2003:
Collar clamping diameter:
This manual shall be subject to modification without prior notice in the course of developments and
technical progress.
Note: The technical data may differ depending on the country.
Symbols
The following symbols are used for the equipment. It is important to know their meaning before you use
the tool.
Intended use
The Makita DBM 131 wet and dry diamond core drilling machine is, in connection with diamond drill bits,
used for dry cutting in brick, masonry and sand-lime brick and wet cutting in concrete and stone.
The plastic cap also remains on the spindle during dry cutting and shall only be removed when
replacing the shaft seals.
When drilling bores with a diameter of more than 40 mm using the 1
stand is compulsory.
Work with concentration and care.
Keep your workplace clean and avoid hazardous situations.
Precautions shall be taken to protect operators.
Double protective insulation
st
1 gear
nd
2 gear
st
1 gear
nd
2 gear
Read instructions
110 V ~
1500 W
0 - 800 min
0 - 1570 min
132 mm
70 mm
II
M 18
6.3 kg
53 mm
st
gear, the use of a suitable drill
-1
-1