SUOMY STELLAR Manual De Instrucciones página 16

EN
WARNING
Thank you for choosing SUOMY.
Designed and manufactured in compliance with the highest
qualitative standards specifically for motorcycle use, STELLAR is
certified by the most important Certification Bodies.
Suomy cannot be held responsible for direct or indirect damages
resulting from an incorrect use of the product and/or for using the
helmet in situations that go beyond the normal conditions of use or
the modalities indicated in this booklet.
Before using the helmet, carefully read this manual. Keep it at hand
for future reference.
For further information, contact your Distributor or Suomy.
Use this helmet in compliance with the instructions contained in
this manual. Compliance with these instructions will make your
helmet last longer and will assure maximum product performances.
Modifications and/or alterations to the helmet and/or any of its
components shall make the warranty void and may jeopardize the
safety requirements or make the product non-compliant with the
certification standards.
All the Suomy products are constantly subject to a continuous
improvement process, that's why Suomy reserves the right to make
changes, without prior notice, to the product object of this manual.
It is therefore not possible to exercise any rights on the basis of the
information, illustrations and descriptions contained in this manual.
STELLAR was developed and tested to assure, together with the
safety features, the best level of comfort and noise reduction during
ordinary conditions of use. However, the particular configuration of
16
the vehicle and/or the position of the rider or both factors can entail
situations that could not be foreseen during the manufacturing
of the product that may generate aerodynamic rustles or hissing
sounds.
Suomy therefore, cannot be held responsible if this should occur.
STELLAR is not designed to be used with earphones and/or similar
devices.
FEATURES
The internal shell can be totally removed. It is made in excellent
anallergic fabric with anti-bacteria treatment.
All the parts in contact with the face are easily washable.
Interchangeable side cheek pads, available in different sizes, as
accessories to assure the best fit for all head sizes.
The STELLAR ventilation system along with the particular shape
of the internal polystyrene shell, optimizes outside and inside air
flows, fed by two air intakes, which exploit the Venturi effect thus
optimizing internal ventilation. The four back air inlets release the
air flows. This assures a more uniform and continuous flow of air
inside the shell, which is also enhanced by the extraction grid on
the back part.