SUOMY SPEED JET Manual De Instrucciones página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EN
Warning
Thank you for choosing SUOMY.
Designed and manufactured in compliance with the highest
qualitative standards specifically for motorcycle use, SPEEDJET is
certified by the most important Certification Bodies.
Suomy cannot be held responsible for direct or indirect damages
resulting from an incorrect use of the product and/or for using the
helmet in situations that go beyond the normal conditions of use
or the modalities indicated in this booklet.
Before using the helmet, carefully read this manual. Keep it at
hand for future reference.
For further information, contact your Distributor or Suomy.
Use this helmet in compliance with the instructions contained in
this manual. Compliance with these instructions will make your
helmet last longer and will assure maximum product performances.
Modifications and/or alterations to the helmet and/or any of its
components shall make the warranty void and may jeopardize the
safety requirements or make the product non-compliant with the
certification standards.
All the Suomy products are constantly subject to a continual
improvement process, that's why Suomy reserves the right to make
changes, without prior notice, to the product object of this manual.
It is therefore not possible to exercise any rights on the basis of the
information, illustrations and descriptions contained in this manual.
SPEEDJET was developed and tested to assure, together with
the safety features, the best level of comfort and noise reduction
during ordinary conditions of use. However, the particular
configuration of the vehicle and/or the position of the rider or both
factors can entail situations that could not be foreseen during the
manufacturing of the product that may generate aerodynamic
16
rustles or hissing sounds. Suomy therefore, cannot be held
responsible if this should occur.
SPEEDJET is designed to be used with earphones and/or similar
devices.
Features
The internal shell can be totally removed. It is made in excellent
anallergic fabric with anti-bacteria treatment.
All the parts in contact with the face are easily washable.
Interchangeable side cheek pads, available in different sizes, as
accessories to assure the best fit for all head sizes.
The SPEEDJET ventilation system along with the particular shape
(Suomy patent) of the internal polystyrene shell,
optimizes outside and inside air flows, fed by two air intakes, which
exploit the Venturi effect thus optimizing internal ventilation.
The four back air inlets release the air flows.
This assures a more uniform and continuous flow of air inside
the shell, which is also enhanced by the extraction grid
on the back part.

Publicidad

Tabla de contenido
loading

Tabla de contenido