7.Multi-Stage Cooking
Two stages of cooking can be maximumly set. If one stages is defrosting, it should
be put in the first stage. The buzzer will ring once after each stage and the next stage will
begin.
Note: Auto menu cannot be set as one of the multi-stage.
Example: if you want to defrost the food of 500g + 80% microwave power for 5 minutes.
The steps are as following:
1) Press "
2) Turn "
" to adjust the weight of the food. Stop turning when "500" displays;
3) Press"
" twice to choose 80% microwave power;
4) Turn "
" to adjust the cooking time of 5 minutes;
5) Press "
Note: When the first stage finish, buzzer sounds once then the second stage begins.
When all of them finish, buzzer sounds five times and the unit turn back to the waiting
states.
8. Pre-set Function
1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. Two stages can be set at most. Defrosting
should not be set here.
3) Press "
". The current clock is displayed. The hour figure flash;
4) Turn "
" to adjust the hour figures, the input time should be within
0--23.
5) Press "
", the minute figures will flash.
6) Turn "
" to adjust the minute figures, the input time should
be within 0--59.
7) Press "
ring twice when the time arrives, then cooking will start automatically.
Note: 1) Clock must be set first. Otherwise,pre-set function will not work.
2) If the pre-set program has been set without the cooking program,
the whole setting will be used as an alarm clock. That means when
pre-set time arrives, buzzer will sound five times only.
", "dEF1" displays;
" to start cooking.
" to finish setting. ":" will light, buzzer will
GB
15