Taurus LIQUAJUICE PRO Manual De Instrucciones página 9

- Connect the appliance to a base with an earth
socket withstanding a minimum of 10 amperes.
- The appliance's plug must fit into the mains
socket properly. Do not alter the plug. Do not
use plug adaptors.
- Place the appliance on a horizontal, flat, stable
surface.
- Do not use the appliance if the cable or plug is
damaged.
- If any of the appliance casings breaks, immedia-
tely disconnect the appliance from the mains to
prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
- Keep the working area clean and well lit. Clutte-
red and dark areas invite accidents.
- Do not wrap the power cord around the applian-
ce.
- Do not clip or crease the power cord.
- Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
- The appliance is not suitable for outdoor use.
- Supply cord should be regularly examined for
signs of damage, and if the cord is damaged,
the appliance must not be used.
- Do not touch the plug with wet hands.
- Do not touch any of the appliance's moving
parts while it is operating.
Use and care:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if the parts are not
properly fitted.
- Do not use the appliance if the switch does not
work.
- Do not move the appliance while in use.
- This appliance is for household use only, not
professional, industrial use.
- Store this appliance out of the reach of children
and/or those with reduced physical, sensory or
mental abilities or those unfamiliar with its use
- To push the food, always use the food pusher.
Never use your fingers or other accessories.
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance for more than 15
minutes at a time. In case of operate in cycles,
allow the appliance a resting period of at least
10 minutes between each cycle. Under no cir-
cumstances should the appliance be operated
for more time than necessary.
- Do not use the appliance with frozen goods, ice
or those containing bones.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
Instructions for use
Before use:
- Make sure that all the product's packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
Use:
Assembling
- Unroll the cable completely before plugging it in.
Juice Tap (L)
- it can be fixed onto the juice outlet, simply close
the tap while juicing until the juicing bowl is
approximately 1/2 full. Then open the juice tap
allowing the juice flow into the juice pitcher/jug.
The juice tap can also be effect on reducing
froth and foaming in some juice & self clean
Important:
- Prior to asembling the juicer, please check this
point : at the main Body of the juicing bowl there
is a rubber stopper (N) (see fig 2). When in
place, the Rubber stopper ensures all the juice
only exits via the juice outlet. Before juicing
always ensure that the rubber stopper (N) is
firmly in place
- Put the juicer bowl (E) on the base (F) (Inserting
the slots)
- Place the strainer (D1) into the spinning brush
(D2), align the dot on the strainer keep in line
with the arrow on the juicing bowl, then insert
strainer together with the spinning brush into
the juicing bowl. When the dots are correctly
aligned the strainer and spinning brush will lock
in place
- Put the juice auger (C) into the filter (D1) and
turn until it drops into position
- Put the feeding tube (B) onto the juice bowl (E),
making sure it is well fitted. To do it, align the
arrow on the feeding tube (B) with the arrow on
the juicing bowl (E) turning, toward the lock
position