Vacuuming Of Liquids; Maintenance And Repairs - Nilfisk VHS110 CR Manual De Instrucciones

VHS110 CR

Vacuuming of liquids

Comply with the safety regulations governing the
materials for which the vacuum cleaner is used.
■ Before vacuuming, check that the float is present.
■ If foam forms, turn off the vacuum cleaner
immediately and empty the container.
■ Warning: switch off the vacuum cleaner
immediately if foam or liquid leaks out.
■ Warning: the dirty liquid collected by the vacuum
cleaner must be considered conductive.
Do not use the vacuum cleaner without the float!
If it's used without the float, the vacuum cleaner may
be seriously damaged.

Maintenance and repairs

Disconnect the vacuum cleaner from its power
source before cleaning, servicing, replacing parts or
converting it to another version/variant, the plug must
be disconnected from the socket.
■ Carry out only the maintenance operations
described in this manual.
■ Use only original spare parts.
■ Do not modify the vacuum cleaner in any way.
Failure to comply with these instructions could
jeopardize your safety. Moreover, such action would
immediately make the EC declaration of conformity
issued with the vacuum cleaner void.
Contact the manufacturer's technical service or sales
GB
network for maintenance operations not described in
this manual.
C423
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
6
03/2017