EdilKamin NEA Instalación Uso Y Mantenimiento página 24

B
B
fi g. 1
C
fi g. 2
fi g. 3
INSTALLATION
IMPORTANT FOR PREVENTING BREAKAGES
BEFORE MOVING THE STOVE OFF THE PALLET,
REMOVE THE GLASS SIDES IN ACCORDANCE WITH
B
THE FOLLOWING INSTRUCTIONS:
Fig. 1
Open the door and remove the lower metal panel (A) by un-
screwing the two screws.
Loosen the four screws placed inside the upper and lower part
of the frames supporting the glass sides (B).
B
Fig. 2
Remove the three screws found on the rear of each of the glass
sides (C), holding the sides to prevent them from falling.
A
Fig. 3
Remove the glass sides (D - Fig. 8), sliding them off horizon-
tally.
THE STOVE CAN NOW BE REMOVED FROM THE
PALLET AND POSITIONED IN THE CHOSEN POINT
OF INSTALLATION.
Fig. 4
Replace the lower metal panel (A) removed previously.
- Apply the lower horizontal element in glass (E - packaged
separately) to the lower structure of the stove, fastening it into
place using the stud screws and washers provided (F).
- Replace the glass sides (D), repeating the steps described
above in reverse order
D
fi g. 4
- 24
-
E
F
A