Remote Control - EdilKamin NEA Instalación Uso Y Mantenimiento

REMOTE CONTROL

This controls all the functions.
Key to buttons and display:
: to turn off and on (to go from "remote control on standby" to "remote control on")
+/- : to increase/decrease the various regulations
A : to select Automatic function
M : to select Manual function and access the control and programming menus
The display also shows other useful information in addition to the icons described above.
- Stand-by position:
shows SET temperature (20°C), kg of pellets (15 kg) remaining in tank and current time (15:33)
- Manual work phase:
shows power set (Power 1), kg of pellets and autonomy remaining (15 kg 21 hrs)
- Automatic work phase:
shows temperature set (Set 22°C), kg of pellets and autonomy remaining (15 kg 21 hrs).
DO NOT PRESS THE BUTTON MORE THAN ONCE
Note: If the radio control is not used for a few seconds, the display will go dark as it has moved into the power-saving function.
The display can be reactivated by pressing any button.
Fan de-activation
To de-active/re-activate the fan of the stove, proceed as follows: press the button M for 2", press the button + twice; the wording
"COMFORT AIR" will appear on the display; confi rm this with the button M; you will thus gain access to the fan selection menu.
With the +/- buttons, the display will move alternatively from COMFORT AIR (ventilation on) to "AIR OFF" (ventilation off);
press the button to memorise the setting.
INSTRUCTIONS FOR USE
- 27
- icon fl ashing: remote control searching for network
- icon fi xed: remote control with connection enabled
keypad locked (press "A" and "M" in parallel for a few seconds
to lock or unlock the keypad)
fl at battery (3 mini alkaline batteries type AAA)
programming enabled
alphanumeric display consisting of 16 fi gures arranged in two
lines of 8 fi gures
- icon fl ashing: stove turning on
- icon fi xed: stove working
manual adjustment function (display shows working power)
automatic function (display shows temperature)
.
-