Display Settings - JVC KD-R988BTS Manual De Instrucciones

AUDIO SETTINGS
Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]
* 1
Before making an adjustment, select the speaker:
When 2-way crossover is selected:
FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER
– [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] is selectable only if a setting other than
[NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. ( 25)
When 3-way crossover is selected:
TWEETER LEFT/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER
– [WOOFER] is selectable only if a setting other than [NONE] is selected for [WOOFER] of
[SPEAKER SIZE]. ( 26)
* 2
Displayed only when [X ' OVER TYPE ] is set to [2-WAY] ( 23) and if a setting other than
[NONE] is selected for [REAR] of [SPEAKER SIZE]. ( 25)
If you specify the distance from the center of the
currently set listening position to every speaker, the
delay time will be automatically computed and set.
1 Determine the center of the currently set listening
position as the reference point.
2 Measure the distances from the reference point to
the speakers.
3 Calculate the differences between the distance
of the furthest speaker (rear speaker) and other
speakers.
4 Set the [DISTANCE] calculated in step
individual speakers.
5 Adjust [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the
listening position

DISPLAY SETTINGS

Symbolic button
1
Press and hold
2
Press
press
3 Repeat step 2
3
for
follow the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
DISPLAY
DIMMER Dim the illumination.
OFF: Dimmer is turned off. Brightness changes to [DAY] setting.
ON: Dimmer is turned on. Brightness changes to [NIGHT] setting.
( 28, [BRIGHTNESS])
DIMMER TIME: Set the dimmer on and off time.
1 Press
2 Press
(Default: [ON]: PM6:00 ; [OFF]: AM6:00)
DIMMER AUTO: Dimmer turns on and off automatically when you turn
off or on the car headlights. *
* 1
The illumination control wire connection is required. ( 35)
.
to select an item (see the following table), then
.
until the desired item is selected/activated or
to adjust the [ON] time, then press
.
to adjust the [OFF] time, then press
.
1
.
Default: XX
27
ENGLISH