STEP :: 01
PREPARE THE REMOTE TRANSMITTER
CHARGE THE REMOTE TRANSMITTER
1. Lift the rubber cover protecting the Charging Jack.
2. Connect one of the charger connectors to the
Charging Jack.
3. Plug the charger into a standard wall outlet.
4. Charge the Remote Transmitter for 2 hours for the
first charge and every charge thereafter.
Using Lithium-Ion technology, the Remote
Transmitter only requires a 2 hour charge . It
is not harmful to let the unit charge for more
than 2 hours .
5. When charging is complete, replace the
rubber cover.
NOTE: Approximate battery life between charges is 50 to
70 hours, depending on frequency of use.
TRANSMITTER INDICATOR LIGHT
OPERATIONAL MODE
Continuous static,
tone, or vibration
stimulation pressed
Continuous static,
tone, or vibration
stimulation pressed
Momentary static
stimulation button pressed
Momentary static
stimulation button pressed
Unit is charging
Unit is fully charged
(charger still connected)
LIGHT COLOUR
BATTERY STATUS
Green
Good
Red
Low
Green
Good
Red
Low
Green
Low
Green
Good
sportdog.com
CHARGER CONNECTOR
PLACED IN THE
REMOTE TRANSMITTER
CHARGING JACK
LIGHT FUNCTION
Light is solid in colour
while button
is pressed
Light is solid in colour
while button
is pressed
Light flashes once and
turns off
Light flashes once and
turns off
Light is solid in colour
while charging
Light flashes once
per second once the
battery is completely
charged
7