Atlantic TRION Manual De Instrucciones página 3

Water Parameters for Optimal Performance:
To achieve the best results with the Triton Ionizer it is recommended
that the water feature's water is within the parameters listed below.
The water feature's water parameters can change during the season,
especially in features that experience excessive evaporation and require
significant water to be added. Many times a simple water change can
help reset the water feature's water parameters.
Total Alkalinity 80-120ppm
PH 7.2-7.8
*Note: maximum operating range: Total Alkalinity 80-250ppm
*Note: pH can be affected by heavy loads of debris composition
*Warning: Copper ions can be toxic to fish if the alkalinity is below
50ppm
Installation:
Mount the control panel in the desired
location. The control panel is weather
proof, but should be mounted on a
wall or post above ground level. Ensure
that the power cord is within reach of a
properly grounded GFCI outlet, and that
the electrode cord will reach the desired
installation point. If installing the Triton
Ionizer in conjunction with Atlantic Pro
Series skimmers, the electrode housing
should be plumbed into the waterfall
inside the pump chamber in the back of the skimmer. (Fig.1) If installing
the Triton Ionizer in conjunction with Atlantic Oasis Series skimmer, the
electrode housing will need to be installed in a valve box just outside
of the skimmer. The valve box must be located in an area accessible for
maintenance and winterization.
Measure the feed line to determine the
proper placement of the electrode hous-
ing. (Fig.2) The electrode housing should
be installed in the center of the waterfall
supply line, between the check valve and
the outside wall of the skimmer.
Note: The electrode housing utilizes
2"sch40 slip connections and can be in-
stalled in a 2" flexible PVC supply line us-
ing standard glue and cleaner. Additional
fittings (not included) may be required to
adapt the electrode housing to a specific
sized pipe.
Fig. 1
Fig. 2
3