VENTILAIRSEC VMI PULSE’R Prestige 2 Manual De Uso página 40

4.2.3.2 Presentation of the pictograms
Main screen
Ambient temperature measured in the living area where the remote
control is located.
Air quality indicator according to humidity. The more the cursor is to the
left, the drier the air is; the more it is to the right, the more humid the air
is. The middle position corresponds to the most comfortable conditions.
Filter status display.
When the filter is orange, we recommend that you order a new filter
from your installer.
To change the filter (see chapter 5.1)
Manual mode activated.
Warning: when this mode is active, the automatic functions are no longer
operational.
Malfunctioning detected.
Contact your installer.
Radio reception quality indicator. If the reception is bad, move your
remote control closer to the VMI® unit.
Battery indicator for the 2 AA LR6 batteries
To change the batteries (see chapter 5.2)
Indicator for the minimum set temperature for preheating the blown air.
N.B. The lower the set temperature is, the lower the power consumption
is. You are advised to cut the set temperature during the hot season.
Fan operating speed indicator. In automatic mode, the speed may vary
depending on various parameters to adjust the ventilation flow rate to
the requirements of the premises.
High outdoor humidity indicator. The intelligent VMI® unit adjusts its air
flow rate to stop air that is too humid entering the premises.
39