Cognex In-Sight CIO-MICRO Manual De Instrucciones página 14

Specifications
Compatibility In-Sight Micro series, In-Sight 5000 series
Optically isolated Trigger input.
Trigger
Inputs 8 general-purpose, optically isolated discrete inputs.
Outputs 8 general-purpose, optically isolated discrete outputs.
In-Sight Micro series: 2 optically isolated NPN/PNP high-speed outputs.
High Speed
In-Sight 5000 series: 2 NPN high-speed outputs.
Outputs
In-Sight 7000 series: The I/O module does not provide access to the In-Sight 7000 series vision
system's high-speed outputs. The In-Sight 7000 series vision system's high-speed outputs are
only accessible from the vision system's Power and I/O Breakout cable.
CC-Link CIO-MICRO-CC only. Standard CC-Link terminal connectors. See the CC-Link specifications for
more information.
Ethernet RJ-45 10/100 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab
(LAN) Port 100Base-T Ethernet).
PoE Port RJ-45 10/100 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab
100Base-T Ethernet) with PoE.
Serial 1 RS-232C port (4800 to 115,200 baud), 8 data bits, 1 stop bit, RxD, TxD, and flow control
(RS-232) (RTS/CTS & XON/XOFF).
Port
1
The CIO-MICRO &CIO-MICRO-CC I/O modulessupport In-Sight 5100 seriesand 5400 seriesvision systemswith 128MBnon-volatile
flash memoryor higher and support allIn-Sight 5600 seriesvision systems.
2
The I/O module doesnot provide accessto the In-Sight 7000 seriesvision system'sTrigger input. The In-Sight 7000 seriesvision
system'sTrigger input isonlyaccessible from the vision system'sPower and I/O Breakout cable.
1
and In-Sight 7000 series vision systems.
2
12