C-Cdc / R-Cdc / T-Cdc; Name - Nome - Midland G18 Manual De Instrucciones

C-CDC / R-CDC / T-CDC

The CTCSS tones can be added to the channels for creating new private
channels. They are similar to access codes and enable the radio to com-
municate only with the users that are tuned on the same channel and
have set the same code. For each channel you can set up to 50 CTCSS
tones and 105 DCS codes.
To select a CTCSS tone:
1. Press the MENU button;
2. Turn the Encoder knob till "C-CDC"(in TX and RX); "R-CDC"(only in
RX) or "T-CDC" (only in TX) appears on the display;
3. Push ENT to enter the function;
4.
Turn the Encoder knob and select the desired CTCSS tone
5. To confirm, press the ENT button.
The setting of a CTCSS tone disables all DCS codes, because these functions
cannot be used simultaneously.
If you want to use and select a DCS code, instead of a CTCSS tone, follow
these steps:
1. Press the MENU button;
2. Turn the Encoder knob till: "C-CDC"(in TX and RX); "R-CDC"(only in
RX) or "T-CDC" (only in TX) appears on the display;
3. Push ENT to enter the function;
4. Press the Function key 1;
5.
Turn the Encoder knob and select the desired DCS code;
6. Confirm the selection by pressing the ENT button.
The setting of a DCS code disables all CTCSS tones, because these functions
cannot be used simultaneously.

Name - Nome

It is possible to choose and set a name that will appear on the display
instead of the channel number.
42 | Midland G18 instruction guide