Anleitung BAK 12_SPK7:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
2. Layout (Fig. 1)
1
Complete cordless air pump
2
Union nut
3
Safety lock-off
4
ON/OFF switch
5
Adapter holder
6
Rechargeable battery pack
7
Pressure hose
8
Bicycle adapter
9
Ball adapter
10 Airbed adapter
11 Battery charger
12 Charging adapter
3. Important information
Be sure to read the following information before you
use your cordless air pump for the first time:
1. The replaceable NC battery pack for the cordless
air pump is not charged when delivered. The
battery pack has to be charged before you use
the tool for the first time.
2. Charge the battery pack with the charger
supplied. An empty battery pack requires a
maximum charging period of 3 to 5 hours. Do not
use the supplied charger to charge other items of
equipment.
3. The battery pack does not reach its maximum
capacitance until it has been charged and
discharged approximately five times.
21.12.2006
14:08 Uhr
Seite 7
4. NC battery packs lose their charge even when
they are not being used. Regular charging is
therefore recommended.
5. Please check the data marked on the rating plate
of the battery charger. Be sure to connect the
battery charger to a power supply with the
voltage marked on the rating plate. Never
connect it to a different mains voltage.
6. In heavy use the battery pack will become warm.
Allow the battery pack to cool to room
temperature before commencing with the
charging.
7. Always check the actual air pressure of the
object before you start to pump it up.
8. The objects to be pumped must be firmly held or
clamped.
9. Always check that the pump and the object to be
pumped up are correctly connected.
10. Before you attach the pressure hose or adapter,
tighten the union nut securely.
11. Do not unscrew the union nut during use.
12. Activate the transport brace when not in use.
13. Always use the pressure hose for difficult to
access positions. To do this, unscrew the union
nut, attach the pressure hose by inserting with a
twisting movement and retighten the union nut.
14. Die cordless air pump can generate up to 11 bar
of air pressure. In order to avoid bursting the
object you are filling, always comply with the
instructions for that object.
15. Never exceed the specified air pressure!
Bursting objects can cause serious injury.
16. Never clean your clothes with compressed air.
17. Do not blast persons or animals with
compressed air.
18. Keep the air vents clean.
19. Take steps to ensure that the cordless air pump
does not draw in any dust or contaminants.
20. Do not use the cordless air pump to fill high-
pressure tires, such as those on heavy duty
trucks, tractors and trailers.
21. Never subject the device to so much load that it
stops operating.
22. Use only genuine accessories.
4. Proper use
This device is intended solely for pumping up vehicle
tires, bicycle tires and blow-up leisure, sports and
beach articles. It is not suitable for large-volume
articles (e.g. rubber dinghies, large airbeds).
GB
7