Technical Data; Disposal And Recycling; Cleaning, Maintenance And Ordering Of Spare Parts - EINHELL Bavaria BAK 12 Manual De Instrucciones

Bomba neumática de batería
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
Anleitung BAK 12_SPK7:_

6. Technical data

Cordless air pump
Motor power supply:
Air pressure, max.:
Delivery volume, max.:
Approx. weight with battery:
L
sound pressure level
pA
L
noise level
WA
Vibration a
:
2,867 m/s²
hv
Battery charger
Voltage:
230 V ~ 50 Hz
Charging voltage:
15.6 V d.c.
Charging current:
On-load factor
A load factor of S2 3 min (intermittent periodic duty)
means that you may operate the motor continuously
for no longer than the time stipulated on the
specifications label (3 minutes ON period). If you fail
to observe this time limit the motor will overheat.
During the OFF period the motor will cool again to its
starting temperature.
7. Cleaning, maintenance and ordering
of spare parts
Always pull out the mains power plug before starting
any cleaning work.
Cleaning
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
We recommend that you clean the device
immediately each time you have finished using it.
Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts
of the equipment. Ensure that no water can seep
into the device.
Maintenance
There are no parts inside the equipment which
require additional maintenance.
21.12.2006
14:08 Uhr
Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
12 V d.c.
Article number of the machine
11 bar
Identification number of the machine
Replacement part number of the part required
10 l/min.
For our latest prices and information please go to
1.2 kg
www.isc-gmbh.info
81 dB(A)
92 dB(A)

8. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
500 mA
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
Seite 9
GB
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

45.101.20

Tabla de contenido