Technical Data; General Notes - MZ electronic EV030-Radio Instrucciones De Uso

Description
The EV030-Radio chain counter displays the length of chain let out or down, expressed in metres or feet
and the speed of the same.

Technical data

Receiver
Power supply
No-load current intake
Protecting grading
Operative temperature
Size (mm)
Weight (g)
Transmitter
Power supply
Current intake
Protection rating of front cover
Operative temperature
Graphic display
Max. chain length
Size (mm)
Weigth (g)
* excluding cable connection zone - ** without protective cover
Warning
CONNECT ONLY TO A DC POWER SUPPLY.

General notes

The EV030-Radio chain counter must be used solely for the purposes described herein, i.e. to operate
and display the number of metres/feet of chain let out by an anchor windlass. Any other use is to be
considered improper.
Any tampering with the instrument will result in immediate voiding of the warranty.
Components
The package contains:
•
radio chain counter, seal and closure cover;
•
10-pole male connector with crimp-type 2 male contacts;
•
transmitter-receiver power unit;
•
instructions for use.
Installation
On a few models of anchor windlass the sensor and the magnet are already installed (chain
counter setting). Therefore, the operations described below are not necessary.
EV030-Radio 17
English
from 10 to 30 V DC
max 50 mA
IP56
0 / +70 °C (32 / 158 °F)
150 x 110 x 75
350
from 10 to 30 V DC
min. 5 mA – max 40 mA
IP65*
0 / +70 °C (32 / 158 °F)
128 x 64 pixel
999 metres – 999 feet
100 x 100 x 32**
160
Rev. 08 – 2019