Measurement Reset - MZ electronic EV030-Radio Instrucciones De Uso

Use
Press the (ON) for 3 seconds to turn on the device. The instruments switches off 30 seconds after the
last command given (adjustable default time – see "Turnoff Time").
Press key (UP) to control the anchor ascending.
Press key (DOWN) to cast anchor.
When any key is released (UP or DOWN) the corresponding action is stopped.

Measurement reset

To reset the measurement count simultaneously press the
three seconds.
Measurement reset may also be performed in the Measurement menu by selecting "Yes" in the Reset
Measure row.
Automatic casting of the anchor
This function must be enabled in the Alarms and Functions menu (disabled by default).
Select the row "Auto Down" and set the value at which the anchor must stop. Then press the
and (DOWN) keys for at least three seconds. Once anchor casting has commenced, release the keys.
For safety reasons it is however possible to interrupt automatic descent by pressing any
instrument key.
EV030-Radio
Chain Up
4.0
21.0
ft
[1]
V=11.6
V=12.4
Chain Down
6.0
10.0
ft
[1]
V=11.6
V=12.4
Alarms & Functi
U p A l a r m 3 . 0
A u t o D o w n O f f
L o a d D e f a u l t N o
E x i t
29
English
(ON) and the (UP) keys for at least
(ON)
Rev. 08 – 2019