Manitou R7 PRO Manual De Instrucciones página 10

Limited Warranty:
HAYES warrants its products to be free from defects in materials or workmanship
under normal intended use for a period of one year (two years in European Union
countries) from the date of purchase, subject to normal wear and tear. Unless otherwise
prohibited by law, any such defective products will be repaired or replaced at the option
of HAYES when received with proof of purchase, freight prepaid. This warranty does
not cover breakage, bending, or damage that may result from crashes or falls. This
warranty does not cover any defects or damage caused by alterations or modifications
of HAYES products or by normal wear, accidents, improper maintenance, damages
caused by the use of HAYES products with parts of different manufacturers, improper
use or abuse of the product, application or uses other than those set forth in the HAYES
instruction manual or failure to follow the instructions contained in the applicable
HAYES instruction manual. Instruction manuals can be found on-line at www.
hayescomponents.com. Any modifications made by the BUYER or any subsequent
user will render the warranty null and void. This warranty does not apply when the
serial number or production code has been deliberately altered, defaced or removed
from the product. The cost of normal maintenance or replacement of service items,
which are not defective, shall be the BUYER's responsibility. If permitted by local law,
this warranty is expressly in lieu of all other warranties (except as to title), express or
implied, and in particular and without limitation HAYES disclaims the implied warranties
of merchantability or fitness for purpose If for any reason warranty work is necessary,
return the component to the place of purchase or contact your dealer or local HAYES
distributor. In the USA, contact HAYES for a return authorization number (RA#) at
(888) 686-3472. At that time, instructions for repair, return, or replacement shall be
given. Customers in countries other than the USA should contact their dealer or local
HAYES distributor.
Limitation of Liability.
Unless required by mandatory law, HAYES shall not be liable for any incidental,
indirect, special or consequential damages.
This warranty does not apply to normal wear and tear. Wear and tear parts are subject
to damage through normal use, failure to service according to recommendations or
riding in conditions other than recommended. The cost of normal maintenance or
replacement of service items, which are not defective, shall be paid for by the original
purchaser. Wear and tear parts that will not be replaced under warranty include but are
not limited to the following:
- Bushings
- Rear Shock
Mount Hardware
- Handlebar grips
- Tubeless Valves
10
-
Dust Seals
- Fork and Shock air
seals and/or O-rings
- Bearings
- Upper Stanchion Tubes
- Stripped or worn bolts
- Remote Lockout Cable
- Gloves
- Lower Stanchion
Tubes(Dorado)