Manitou R7 PRO Manual De Instrucciones página 7

TABLE 1 - TIRE CLEARANCE - CONTINUED
FORK MODEL
100 MATTOC 26 x 2.4"
100 MATTOC 27.5 x 2.4"
110 MATTOC 27.5 x 2.6"
110 MATTOC 27.5+ x 3.4"
110 MATTOC 29 x 2.35"
110 MATTOC 29+ x 3.4
110 MATTOC 29+ x 3.0"
100 MARKHOR 29"
100 MARKHOR 27.5
110 MARKHOR 29"
110 MARKHOR 27.5
QR15 INSTALLATION INSTRUCTIONS
1. Flip the lever to the open position. You'll see an open arrow on the side of the lever.
Align cross pin with the arrow on the axle. You will feel it click into place when it is in
the proper position.
2. Place wheel into fork. Insert axle into the drive side dropout of the fork. When
inserting the axle, you want to make sure that the writing or arrow on the axle is
facing up and that the cross pin is vertical. The lever of the axle will be pointing out
towards the front of the fork. Insert axle thru the casting and hub until it stops.
3. Rotate lever 90 degrees clockwise until you feel it click into place.
4. Flip lever up to the closed position locking the axle. If it feels like it requires too
much force to close the lever, adjust the tension with the adjuster dial. Adjust by
turning the adjuster dial clockwise to decrease tension. Counter-clockwise rotation
will increase tension if the axle feels too loose when closing the lever.
MINIMUM
CLEARANCE
IMPROPERLY TENSIONED AXLE, LEVER NOT COMPLETELY
ENGAGED OR THE LEVER BEING IN ANY OTHER POSITION THAN THE
UPWARDS CLOSED POSITION COULD RESULT IN DISENGAGEMENT
OF THE AXLE POSSIBLY CAUSING SERIOUS INJURIES OR DEATH.
MAXIMUM
ARCH
TIRE WIDTH
(SEE FIGURE A)
16mm
6mm
8mm
13mm
6mm
15mm
21mm
6mm 69.5mm
6mm 71.4mm
6mm 80.4mm
6mm 80.2mm
MAXIMUM TIRE
DIAMETER
(SEE FIGURE B)
63mm
63mm
67mm
87mm
65mm
87mm
87mm
754.4mm
730.4mm
735.6mm
696mm
716mm
725mm
742mm
755mm
789mm
776mm
769mm
7